|
- Freescale MPC5534 processor, 1M flash, 64K RAM (1M dev), 80MHz
- Wakeup from key input
- Power hold
- Internal and external watchdog
- 2 x CAN 2.0
- 14 x 0-5V analog input, 12 bit
- 11 x resistance temperature detection input, 12 bit
- 1 x supply voltage measurement, 12 bit
- 4 x 0-5V analog (12 bit) / digital (timed) input
- 5 x digital (timed) input
- 1 x 8A low side spark output
- 2 x 2A low side spark output
- 3 x 5A low side injector output
- 1 x 5A low side PWM output / injector output
- 3 x 8A low side PWM output
- 3 x 2A low side PWM output
- 2 x 0.1A low side PWM output
- 1 x 26A high side output
- 2 x sensor supply, 5V, 250mA
- Reprogrammable
- Open, short and over-current diagnostics
- Digital and analog monitoring of all outputs
|
The M460 is a high performance electronics module that is suited to applications requiring a large number of input/outputs. The chassis mounting, sealed metal housing meets military specifications and IP68 environmental protection standards.
Based on the Freescale MPC5534 32-bit microcontroller, the M460 features 2 CAN interfaces and 53 standard input/output functions via two 40-way connectors. The precision analogue functions include direct support for RTD sensors and thermocouples, while the configurable high current switching outputs support injector, spark and PWM drives. Typical applications include; diesel after-treatment control, transmission control and complex ancillary vehicle functions.
- 128K EEPROM
- Wakeup from CAN interrupt
- External watchdog
- Operating temperature: -40°C to +105°C
- Operating voltage: 12V or 24V
- Size: 238 mm x 202 mm x 50 mm (tapering to 18mm)
- Connectors: 2 x 40-way DRC
- Ruggedized, environmentally sealed housing
- Complex diesel exhaust after-treatment control
- Complex chassis control
- Transmission control
- Ancillary function control
- Computationally intensive ancillary controls with high I/O
- Complex control with high current switching capability
- Simulink™/RTW based development platform
- Simulink™ RTW-Embedded Coder blockset, as well as a C API function library to support C-language implementation of code (or TargetLink™)
- Reprogramming via CAN using CCP
- Calibration: ATI Vision™ or ETAS INCA™
- Processor JTAG port accessible internally
|