|
- Freescale HCS12 processor, 128K flash, 2K EEPROM, 8K RAM, 24MHz
- Wakeup from key input
- Power hold and low current sleep modes
- Internal and external watchdog
- 2 x CAN 2.0
- 5 x analog inputs 0-5V, 10 bit (0-30V configurable)
- 2 x differential analog inputs 0-16V, 12 bit (0-30V configurable)
- 1 x supply voltage measurement, 10 bit
- 3 x PWM outputs or digital inputs/outputs (2x1A and 1x0.5A)
- 3 x PWM inputs or digital inputs/outputs (2x1A and 1x0.5A)
- 1 x PWM input/output or digital input/output (0.5A)
- 1 x digital input/output (0.5A)
- All PWM outputs are at 16-bit resolution or alternatively 7 x PWM outputs are available at 8-bit resolution
- 8 x light emitting diodes, externally visible
- Reprogrammable
|
The M100 module is a compact electronics module that is suited to a wide range of vehicle control applications, including communications gateways and ancillary function control.
Based on the Freescale HCS12 16-bit microcontroller and featuring, 2 CAN Interfaces, 16 standard input/output functions and 8 uncommitted LED indicators; the M100 is often used in prototype applications to integrate and adapt a range of existing closed modules to the new system configuration.
In volume use typical applications are communication gateways and ancillary function control.
- Operating temperature: -40°C to +85°C
- Total output current: 2.5A max
- Size: 85mm x 65mm x 32mm
- Connectors: 24-way and 8-way AMP
- Communications gateways
- Ancillary function control
- M100 Platform Drivers (C API)
- CodeWarrior™ integrated Development Environment (IDE) (compiler, linker and debugger)
- Boot-loader software that enables re-flashing via CAN using the CCP protocol
- M100 build system with ASAP2 file development
|